fbpx

How to Tighten Toilet Seat and Not Let It Wobble

How to Tighten Toilet Seat and Not Let It Wobble

The toilet is something we use multiple times a day, which is why even the smallest of issues will be easily noticed the second we sit on it. We can all agree that a loose toilet seat is one of the worst things. For this reason, knowing how to tighten toilet seat is important.

A toilet seat becoming loose is quite a common occurrence. This can be caused by the constant closing, opening, and sitting on it. All of these eventually loosens the bolts that secure the seat to the toilet bowl.

Thankfully, fixing a loose toilet seat is not a complicated task. Typically, you will only need a screwdriver. On rare occasions, you may also need a ratchet wrench with a deep socket, pliers, and an adjustable wrench. In some cases, certain toilet seats have their own special tightening kit too.

Why Should You Tighten a Loose Toilet Seat?

As mentioned, a toilet seat becoming loose is quite common as it is used multiple times in a day. If there are multiple people using one toilet, then the chances of it becoming loose go up much higher.

You would assume that tightening toilet seats are not necessarily important, but you would be surprised to know that a loose toilet seat can be dangerous to a certain extent. This is especially true if you are an older person or if you suffer from some type of disability.

A loose toilet seat is not stable in any way. If you sit on it, there is a possibility that it would slide constantly or just slide off the toilet bowl completely. If the latter does happen, you will fall on the floor and end up injuring yourself. So, other than just comfort, safety is another reason why you should tighten your toilet seat.

How to Tighten Toilet Seats

As mentioned earlier, tightening a toilet seat is quite a simple process. Below, we will provide you with a step-by-step guide on how you can do this easily so that you never ever have to worry about a loose or wobbly toilet seat.

Step 1

Each toilet seat is different. The seat’s bolts, in some cases, can be exposed whereas some will have a plastic flap that snaps close to cover these bolts.

If you have the latter, all you need is a screwdriver so that you can pry these covers open. Once you have done that, the bolts that secure the seat to the toilet bowl will be exposed.

Step 2

If the bolts on the seat come with slotted heads, then you can tighten them by simply turning them on a clockwise direction with the help of the screwdriver. Do this until you feel they are fully tight.

On the other hand, if you find the bolt only spinning but not tightening, then you will need a pair of pliers. This is so that you can get a grip on the nut that is threaded onto the mounting bolt from under the toilet bowl and simultaneously tighten the bolt with the screwdriver from above.

In most cases, you will find toilet seats using screws made out of steel. However, cheaper toilet seats may have plastic bolts. For this reason, you must ensure that you do not end up breaking the bolts or end up stripping the threads.

Step 3

If you find that it’s necessary, you can also tighten the mounting nut from below. When you are doing this under the toilet bowl, you will need to turn the toilet seat nuts in a clockwise direction until they are properly tightened.

In such cases, we find the ratchet wrench with a deep pocket to be quite useful as it is an easier way to get the bolts tightened. That said, you can also use an adjustable wrench.

Important Note

If by any chance you end up breaking the toilet seat bolts or if they do not tighten, you can simply buy the replacement bolts from any home replacement or a hardware store. If the bolts are rusted or are just frozen in, it will have to be cut off with the help of a hacksaw blade.

You just need to use the blade and not the hacksaw when you do this as it is quite thin and will easily fit under the bolt’s head. This will help in cutting the bolt without the bowl’s porcelain getting scraped. You could also opt to use mini-hacksaws to work in such tight spaces.

On the other hand, if your toilet seat itself is old or in poor condition, then we would recommend not wasting your time tightening the seat. Instead, it would be wiser to just buy a brand new toilet seat.

How to Use a Seat Tightening Kit

Another simple way you can tighten a loose toilet seat is by buying a seat tightening kit from online shopping sites or in-home improvement centers. You will find several different versions of this kit.

This kit will typically include a rubber washer, which fits under the bolts to get rid of that extra space that causes the toilet seat to wobble. There is also a small specialty wrench included, which fits most of the mounting nuts.

Step 1

Begin by removing the nuts from the mounting bolts, and then slip in the rubber washers on to the bolts from under the toilet bowl. Thread the nuts loosely back on the bolts.

Step 2

Once it has been aligned carefully to the seat, tighten the nuts completely using your hands. You can now use the specialty tool that came with the kit to tighten it. This will ensure that your seat is no longer loose.

Conclusion

Toilet seats becoming loose is something that happens very often and to almost any household. Once you know how to tighten toilet seats, you don’t need to go calling any handyman to get this petty issue sorted. As you can see from the detailed guide we have shared above, this entire process is very easy to do.

Whether you choose to tighten it with a screwdriver or if you choose to buy a seat tightening kit, we recommend that you check out your toilet seat thoroughly first. In most cases, you can get away by just tightening it with your hand too.

Click Here to Leave a Comment Below

Leave a Comment: